GENERAL CHARACTERISTICS
SurfaPore T is a water based product modified with nano-sized particles, that fit the pores of a polished surface, penetrate and “flood” the pores, which can accumulate dirt. These nanoparticles have the ability to self polymerize and create an impermeable grid of inert material. After modification, dirt particles fail to penetrate into the microporosity of the surface (marble, granite or polished tile). Therefore, an important, value-adding objective has been achieved: Permanent pore impregnation providing stain proofing and easy cleaning.
APPLICATION SURFACES
Porcelain tiles, granite, polished surfaces
APPLICATION NOTES
Surface Application: The application surface should be dry and clean. Apply SurfaPore T by brush, roller or spraying. No dilution is required. After 15 minutes and before SurfaPore T dries completely, remove any excess and polish, by using a wet cloth and then wipe out with a dry cloth. On sensitive surfaces, reapply within 3 hours. Test results on a small area before full scale application. Maximum effectiveness is achieved 24 hours after application.
Consumption: Estimated consumption rate 14-20 m²/L, strongly dependant on the properties of the surface applied.
