GENERAL CHARACTERISTICS
SurfaPore F is a water based liquid formulation which creates a thin layer on the modified surfaces, preventing water from penetrating. Because of its flexibility, it reduces the swelling and cracking effect. SurfaPore F has a prolonged lifespan and great resistance to UV radiation and weathering, while at the same time it is really cost effective. Modified surfaces underly minimal change to the original natural appearance. Due to its composition, SurfaPore F can be used as a primer before painting, in surfaces such as plasterboards thereby improving the adhesion of paint on substrates.
APPLICATION SURFACES
Plasterboards, drywalls, carton, wood (tropical woods, softwoods, plywoods)
APPLICATION NOTES
Surface Application: The application surface should be dry and clean. Apply SurfaPore F by using a brush or roller. No dilution is required. On very absorptive surfaces re-apply within 3 hours. Maximum water repellency is achieved 24 hours post application.
Consumption: Estimated consumption rate 8-10 m²/L, strongly dependant on the properties of the surface applied.
