GENERAL CHARACTERISTICS
SurfaPore C as a water based, liquid formulation, provides water repellency and protection of a wide range of building surfaces. As its viscosity is similar to that of water, it deeply penetrates into capilaries. It is applied very easily on the surfaces with spray, roller or brush. The nanotechnology based composition assures effectiveness, prolonged lifetime and no change of the original natural appearance. In case moisture is trapped or a water leakage takes place behind a SurfaPore C modified surface, water can evaporate through the open pores to the environment relieving negative capillary pressure. In this manner, swelling and cracking of material are prevented.
APPLICATION SURFACES
Natural and artificial stone, cementitious surfaces, walls, basements, terraces.
APPLICATION NOTES
Surface Application: The application surface should be dry and clean. Apply SurfaPore C by using a brush, roller or spray gun. No dilution is required. On very absorptive surfaces re-apply within 3 hours.
Consumption: Estimated consumption rate 8-10 m2/L, strongly dependant on the properties of the surface applied.
