SurfaPaint Wood Stain is a high quality, water-based, clear or coloured impregnation stain varnish that protects any interior and exterior wooden surface from weathering and water or oily stains. Recommended both for DIY applications and industrial applications. It is ideal for uses such as doors, windows, frames, claddings, fences, pergolas and any stained or natural wooden surface. SurfaPaint Wood Stain is a wood impregnation formulation that enhances the appearance of natural wood grains. It prolongs the life-time of your wooden surfaces. It is recommended for new or untreated wood surfaces. Available as a clear coating or in eight natural shades. Other colour shades are available on demand. SurfaPaint Wood Stain does not contain biocides or wood preservatives.
Absorptive and sensitive natural wooden surfaces such as doors, windows, frames, claddings, fences/posts, roof shingles, garden furniture/sheds, pergolas, deckings & docks.
Applicability: SurfaPaint Wood Stain is ready to use. Stir well before use. Brush thinly and evenly working varnish well into the grain. Maintain a wet edge when painting. Thick coats wrinkle when dry. Avoid bubbles. Apply 2 coats for good protection and 3 coatings for excellent protection which may then also increase the colour depth. Do not over-brush. Lightly sand between coats if necessary with fine sandpaper. Do not apply SurfaPaint Wood Stain if another woodstain or varnish product has been already applied and not adequately removed.
Preparation: Surfaces must be clean, dry and rubbed down with a suitable abrasive paper (in case of unpainted surface).Use methylated spirits to remove oil excess, especially from tropical wood (e.g. teak wood).
Spreading Rate: 10-12 m²/L.
Drying Time: 3-4 hours after the previous application