SurfaPaint Floor Paint offers easy application, durability and stain resistance is based on the binding resin which combines the excellent physical resistance properties of polyurethanes with the binding and wetting properties of acrylic emulsions. The coating combines unique functionality by an easy to clean, tough and wearing resistant coating. Ultimately, SurfaPaint Floor coating remains clean from greases, oils hot tyres and chemicals preserving the original aesthetic integrity of the applied surface. Durability of the coating permits pedestrian and low vehicle traﬃc. The ﬁnal appearance is white satin or grey and sheen level depends on the substrate ﬁnish/proﬁle.
Domestic concrete surfaces: ﬂoors, patios, pathways and garages.
Applicability: SurfaPaint Floor Paint can be applied directly on concrete surfaces such as ﬂoors, patios, driveways, pathways and garages. New cement substrates should have cured for more than 4 weeks before application. Adverse environmental conditions and/or humidity (>80%RH) during or immediately after application may aﬀect the coating’s performance or drying properties.
Preparation: Ensure all surfaces are clean and dry prior to application. Remove any dust and dirt.
Application note: Stir thoroughly with a ﬂat paddle until homogeneous and occasionally during use. Application temperature should be between 10 – 40 ⁰C and the relative humidity should be between 10% – 80% RH. Dilute paint up to 20% with water to use it as a primer. Apply 2 coats diluted up to 5% with water using a good quality brush, roller or by airless spraying.
Spreading Rate: 10 m²/L at 45 μm
Drying Time: Touch dry: 30 min at 25°C, Overcoating: 2h at 25°C, Pedestrian traﬃc: 16h at 25°C, Vehicle traﬃc: 72h at 25°C. Low temperatures and high humidity will lengthen drying times.