FeatherPlast PA250F is a multifunctional thermo-protective acrylic plaster, easy to apply for exterior and / or interior surfaces. It is used as the final coating of the masonry process offering a smooth finish and a high reflectivity of the thermal radiation of the sunlight (“Cold Coating”). FeatherPlast PA250F uses inert materials made up of numerous closed-porosity porous, air-filled cellular beads, giving it excellent thermal-protection properties. FeatherPlast PA250F helps reduce application costs while improving the thermal performance of the building by reducing heating / cooling costs.
Finish, fine-textured coat on interior or exterior surfaces such as wall, brick, stone, aerated cement blocks, cement boards and gypsum boards
Applicability: Stir well and homogenize. Apply the FeatherPlast PA250F evenly over the surface with a spatula and lay it so that the layer has the size of the plaster grain. When the coating begins to “pull”, rub with a special plastic flue or metal spatula, depending on the desired effect.
Preparation: The application surface must be free of dust, surface contaminants, grease, corrosion deposits and loose or friable materials. Special attention should be given to old-painted surfaces. New substrates from cement or masonry should have cured for more than 3-4 weeks before primer application. For better results apply SurfaMix P as a primer.
Spreading rate: 0,78L/m2 (0,90 kg/m2),
Drying time: 24 hours at normal temperatures and in well ventilated areas.Cleaning of tools: All tools and equipment should be cleaned immediately after use with water.